Custom Search

Saturday, March 28, 2009

Steering Stabilizer

It has been a while since I have added anything to this blog but I have done a little work on Jessie. During the winter I was having a really hard time starting her. I would turn the key and nothing would happen. It would happen intermittently and was really frustrating. I replaced the coil and put in a new starter relay. Neither of which had any impact. I came to the conclusion that the short was located someplace in the steering column. I wasn't going to bother tearing the column apart to look for the short when it only happened intermittently so I found a way around it. With the help of Adam I was able to figure out that if I turned the key on and bypassed the starter relay with a piece of wire I touched to the battery terminal and then to the lead that goes directly to the starter I was able to essentially hot wire the jeep. So to fix my intermittent starting issue I spliced into the wire that goes to the starter and ran a wire to a push button switch I mounted under the dash and then ran a hot line from the fuse box to the switch. So now if I turn the key and nothing happens all I have to do is reach under the dash and push the button and she fires right up. I made sure to keep all the wires neat running them along one of the wiring harnesses and feeding it through the firewall. I did all this with the help of my father in-law Joe. He was a great help.

I really want to take Jessie to the next level but also make keep up with the necessary maintenance required on every vehicle. So today I got brake parts, but instead of getting rebuild kits for the calipers and for the pistons in the rear I just bought all new parts. So the brakes will be 100% brand new parts. I also got new bearings for all 4 wheels. I installed a new steering stabilizer today to help with the shimmy and play I experience while driving. I have also ordered a 3" lift kit from Rusty's off road. It comes with 4 nitro shocks, coils, and add a leaf springs. The suspension is pretty beat right now so not only will it help with clearance and looks, but also with the riding experience.

I will be painting the steel rims when I have them off. I think a gloss black will look pretty good with the red. I also have found a buffing compound that can help decrease the sun damage on the hood and roof of the jeep.

There is a knocking when I accelerate hard. It sounds like the drive shaft slapping around until I get up to speed then it stops. That will be the next task I tackle. I will probably end up replacing 5 things just to get to the problem but I am really enjoying it and am glad when there are new parts on the Jeep.