Custom Search

Tuesday, June 16, 2009

Nibbler Fishing FOB



This project seems to be my main focus lately. Being cash poor and not working on the Jeep much has forced me to look for other avenues of entertainment. The Nibbler Fishing FOB seems to be where I am stuck. There have been a couple of changes made and a discovery as well since I first started this project but I think I am honing in on a completed piece.

The first thing I discovered is that copper tarnishes quickly when handled often. It has a really nice patina and I believe gives it a really classic look. I also discovered copper is to soft to thread and have those threads not round over or strip easily. I still haven't figured out how the cap will stay on but for right now I am using friction. The caps were designed to be tight on the pipe and they are hanging on well. My concern is over time the metal will degrade and loosen. Leaving the owner with a cap only. I do believe this is the final issue though.

As you can see from the above photo I have decided to use a clevis pin and split ring to attach the Nibbler to a key chain. It is possible to find another fastener but I really like how this one works. It acts as an additional swivel and spins freely on the key chain. The fishing line can be tied directly to the Nibbler which can be wedged into a rock, dirt, or piece of wood. Again I like feedback so any comments would be appreciated.

Sunday, June 07, 2009

Slight improvement to the pocket fisherman



I decided to add a copper coupling in between the two caps to give it a streamlined look. I think it looks a lot better. Let me know what you think. Send some suggestions for names if you want.

Dave

Wednesday, June 03, 2009

Pocket Fisherman


I thought I would go off topic for a minute and throw a good idea out there for the outdoor enthusiast. I have been making some para cord key chains and knife lanyards and decided to add a piece of copper to snazz them up a bit. While at the work bench I was brainstorming about ways to use these scraps of copper pipe that I had on the key chains when I came up with a pretty good idea. Inside this 2.25 inch piece of copper is 15' of 6lb test fishing line, 6 sinkers, a swivel, and 2 hooks. You can even use the top as additional weight or as a make shift lure. It is small enough to be a key chain too. You could also put a couple match sticks in there I just don't have any. It is also solder free. I used super glue to keep the bottom cap on. If I had a tap and die set I would have made it so you could screw the top on and then weld a "D" hook to the cap. The it would be more water tight not completely but more. Run the line through the holes on the sides and you have an anchor to wedge into the dirt. It was cheap, fast, and cool enough to boast about. Go make your own today!!!