Custom Search

Wednesday, August 05, 2009

Windshield

I have an actual update on something I had done to the Jeep. I got the windshield replaced. It was 140 bucks and the people came to the house to do it. Not bad. Now when I am driving down the road I will no longer be blinded by the 20+ years of nicks in the glass. Hopefully next week it goes into the garage to get the back brakes finished, the new muffler installed and the steering issues taken care of. I am hoping a new set of bushings will take care of it, but it may be replacing the tie rods. In which case I will make the upgrade to heavy duty ones from Rusty's. I am really excited because we move in 3 weeks and will be living next to Jefferson National Park. The park has ORV trails and I want to be able to tackle them ASAP.

Sunday, July 26, 2009

Dave
just a test video
Dave

hey check out my baby boy! growing sofast he will be off roading with dad soon.
Dave

Tuesday, June 16, 2009

Nibbler Fishing FOB



This project seems to be my main focus lately. Being cash poor and not working on the Jeep much has forced me to look for other avenues of entertainment. The Nibbler Fishing FOB seems to be where I am stuck. There have been a couple of changes made and a discovery as well since I first started this project but I think I am honing in on a completed piece.

The first thing I discovered is that copper tarnishes quickly when handled often. It has a really nice patina and I believe gives it a really classic look. I also discovered copper is to soft to thread and have those threads not round over or strip easily. I still haven't figured out how the cap will stay on but for right now I am using friction. The caps were designed to be tight on the pipe and they are hanging on well. My concern is over time the metal will degrade and loosen. Leaving the owner with a cap only. I do believe this is the final issue though.

As you can see from the above photo I have decided to use a clevis pin and split ring to attach the Nibbler to a key chain. It is possible to find another fastener but I really like how this one works. It acts as an additional swivel and spins freely on the key chain. The fishing line can be tied directly to the Nibbler which can be wedged into a rock, dirt, or piece of wood. Again I like feedback so any comments would be appreciated.

Sunday, June 07, 2009

Slight improvement to the pocket fisherman



I decided to add a copper coupling in between the two caps to give it a streamlined look. I think it looks a lot better. Let me know what you think. Send some suggestions for names if you want.

Dave

Wednesday, June 03, 2009

Pocket Fisherman


I thought I would go off topic for a minute and throw a good idea out there for the outdoor enthusiast. I have been making some para cord key chains and knife lanyards and decided to add a piece of copper to snazz them up a bit. While at the work bench I was brainstorming about ways to use these scraps of copper pipe that I had on the key chains when I came up with a pretty good idea. Inside this 2.25 inch piece of copper is 15' of 6lb test fishing line, 6 sinkers, a swivel, and 2 hooks. You can even use the top as additional weight or as a make shift lure. It is small enough to be a key chain too. You could also put a couple match sticks in there I just don't have any. It is also solder free. I used super glue to keep the bottom cap on. If I had a tap and die set I would have made it so you could screw the top on and then weld a "D" hook to the cap. The it would be more water tight not completely but more. Run the line through the holes on the sides and you have an anchor to wedge into the dirt. It was cheap, fast, and cool enough to boast about. Go make your own today!!!

Wednesday, May 20, 2009

Work Light

There is a worklight under the hood of of the 88 cherokee. It is mounted to a bracket and is retractable like a tape measure. The wire that is in it is long enough to reach the back of the vehicle and fix a a flat in the dark. On my Jeep the line was about a third pulled out and wrapped around the mount. I decided I would take it off and see if I couldn't fix it. Well turns out I could. All I did was pour a little 3-in-1 oil into the hole the wire retracts into and work it back and forth a bit and it was working like a champ. While I was allowing the oil to seep around the internal mechanism I decided to sand and paint the bracket. I just took some 150 grit sandpaper and got all the rust off, washed it down with a degreaser, and painted it with the same red I used on the drums and calipers. It came out looking much better than the original black. I even painted the bolts to pretty it up a bit.

The whole thing took me about an hour and that was because I was just poking around. I had to call my wife down to look because I was kinda proud of the job I did "fixing" the light. It was essentially free since I used leftover stuff from other jobs and it was pretty cool and I have a usable light now.

Sunday, May 10, 2009

Really!!!

I was sitting here thinking about why I like working on my jeep. Since I started modifying the jeep I have spent almost as much on parts as I did buying it, have been totally frustrated, broken several bolts that remain broken, and still have some of the same issues that I have attempted to fix (i.e. I got to use the button to start it for a few days while it was raining). So what is it that draws me to the garage to stare at the Jeep thinking about the next modification. I would say that right now it is having a toddler and infant that I am trying to escape from but that may come across a little cynical. I love to look through the Craftsman catalog as well and unless I have a project I don't get to buy new ones. I think the most outstanding reason I do it is the pure sense of satisfaction I get from it. Even when I screw something up like snapping a bolt on the brake hose I still enjoy working on Jessie. I will actually be doing some work next weekend. I have to try to fix that broken bolt on the brake hose.

Sunday, May 03, 2009

Front Brakes

This weekend I did my front brakes. I wanted to put all new parts on so thats what I did. I was even going to to the bearings but when I got into the job it seemed unnecessary. The bearings were in good shape. I greased the axle and cleaned all the crud off the exposed parts. It took quite a while but it is back to shiny metal again. If I had another vehicle I think I would pull the entire front end, dismantle it and clean and paint all the parts. I don't think that it is probably necessary but it definately makes repairing or replacing parts easier when everything is like new. I can attest to this because I put the wrong caliper on when I was putting the brakes back together and it came off really easy when I took it off.

I used a degreaser to clean the parts called Purple Power. It is a great all around cleaner. While cleaning the caliper mount in the driveway I noticed that there were some rust stains on the steps from the iron railings. I sprayed the spots and let it soak. When I sprayed it off the rust spot was definitely smaller and the pigment of the water was less purple and more red or rusty. I was impressed.

After looking through the book for repairing the back brakes I noticed I am going to need a slide hammer. After having to spend 70 on new tools just to do the front brakes I think I will wait a couple weeks to buy new tools to do the back brakes. I am trying to buy Craftsman products because there is a Sears everywhere and their tools are guaranteed for life. As it is I have a ratchet I need to exchange as the suspension job seems to have destroyed it.

I think one of the most satisfying parts of the Jeep build is just cleaning the undercarriage of the vehicle. Going from thick gunk and debris back to metal that looks like it came from the sales lot makes me feel like I accomplished something. I would recommend that as the starting place for any build.

Tuesday, April 28, 2009

Pics of the lift






Sprayed the pollen off the Jeep this morning so I thought I would put some pics up before it turned green again.

Saturday, April 25, 2009

Lift Complete

Finished installing the 3" lift today!!! The jeep looks great but the directions from Rustys offroad left an important part out. If you remove the supports from the axle at the same time it rotates and makes it impossible to reattach the mounts. I finally figured out how to get it reattached but it took forever.

I still have all the parts for the brakes and new bearings on the floor of my garage. But after the sunburn and aching body from working on the suspension all week I may wait a week or two to install them.

I was really surprised at how different 3 inches makes the jeep look. It definitely looks more like a jeep should!! I will post pics after I bathe her.

Friday, April 24, 2009

3" lift 1/2 done


Got the rear of the lift in hope the rest doesn't take as long.

Posted by ShoZu

Thursday, April 23, 2009

I am the super squirll!!


Posted by ShoZu

Loading from my Iphone

I have wanted to be able to add blog info and photos from my phone and I finally found a great app to do it. Shozu!! Look forward to a lot more detail updated during repairs along with photos.

Posted by ShoZu

Wednesday, April 22, 2009

Lift Kit

I got a TON of new parts for Jessie. We were welfare rich from the Tax refund so I decided it was time to make some necessary repairs as well as put in a 3" lift kit. I decided that I wanted to do the brakes but instead of getting the rotors and drums turned I was going to get brand new everything. I got all new bearings, calipers, pads, everything. I want to make sure that they are 100% when I can finally get offroad.

Doing the actual work has been dramatic.I would bet money that the I am the first person to touch the nuts and bolts of the suspension system since it was built in 1988. I have used an entire can of penetrating spray and still broke one of the bolts for the right rear shock. I got a drill out set...broke it. So I am going to have to get a nut welded on. Since I don't have a welder yet I will have to rely on Adam or pay a garage. Other than every nut and bolt being seized there hasn't been any issues. I have only done the back end so far when I have it all done I will post pics.

I painted the drums and calipers with Dupli-color high heat paint. They are bright red. I plan on painting the atock steel rims a gloss black. I think it will look pretty good. Other than that not too much going on with the old girl. Next step is bumpers and a roof rack!!!

Saturday, March 28, 2009

Steering Stabilizer

It has been a while since I have added anything to this blog but I have done a little work on Jessie. During the winter I was having a really hard time starting her. I would turn the key and nothing would happen. It would happen intermittently and was really frustrating. I replaced the coil and put in a new starter relay. Neither of which had any impact. I came to the conclusion that the short was located someplace in the steering column. I wasn't going to bother tearing the column apart to look for the short when it only happened intermittently so I found a way around it. With the help of Adam I was able to figure out that if I turned the key on and bypassed the starter relay with a piece of wire I touched to the battery terminal and then to the lead that goes directly to the starter I was able to essentially hot wire the jeep. So to fix my intermittent starting issue I spliced into the wire that goes to the starter and ran a wire to a push button switch I mounted under the dash and then ran a hot line from the fuse box to the switch. So now if I turn the key and nothing happens all I have to do is reach under the dash and push the button and she fires right up. I made sure to keep all the wires neat running them along one of the wiring harnesses and feeding it through the firewall. I did all this with the help of my father in-law Joe. He was a great help.

I really want to take Jessie to the next level but also make keep up with the necessary maintenance required on every vehicle. So today I got brake parts, but instead of getting rebuild kits for the calipers and for the pistons in the rear I just bought all new parts. So the brakes will be 100% brand new parts. I also got new bearings for all 4 wheels. I installed a new steering stabilizer today to help with the shimmy and play I experience while driving. I have also ordered a 3" lift kit from Rusty's off road. It comes with 4 nitro shocks, coils, and add a leaf springs. The suspension is pretty beat right now so not only will it help with clearance and looks, but also with the riding experience.

I will be painting the steel rims when I have them off. I think a gloss black will look pretty good with the red. I also have found a buffing compound that can help decrease the sun damage on the hood and roof of the jeep.

There is a knocking when I accelerate hard. It sounds like the drive shaft slapping around until I get up to speed then it stops. That will be the next task I tackle. I will probably end up replacing 5 things just to get to the problem but I am really enjoying it and am glad when there are new parts on the Jeep.